GRAPHTEC CE6000 SERIES User Manual page 140

5
Press the [1] key (X).
SENSING LEVEL X adjusting screen is displayed.
6
Press the POSITION (
setting value.
7
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
SENSING LEVEL is selected and it will return to SENSING LEVEL
screen.
8
Press the [2] key (Y).
SENSING LEVEL Y adjusting screen is displayed.
9
Press the POSITION (
setting value.
10
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
SENSING LEVEL is selected and it will return to SENSING LEVEL
screen.
11
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (4/4).
12
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
) key and increase or decrease the
5-23
Supplement
Setting range is from 30 to 90.
The tool carriage moves in the Y direction,
while the media movies in the X direction.
Raising the numerical value in the following
situations will allow you to detect a
registration mark.
• When the media and registration mark
colors are similar.
• When you pass over the registration mark
point.
Lowering the numerical value in the
following situations will allow you to detect a
registration mark.
• When you detect a point where there is no
registration mark.
• When folds or stains on the media surface
are detected.
Supplement
Setting range is from 30 to 90.
Supplement
It will return to ARMS setting screen (4/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).