Press the [COND/TEST] key in the default screen.
CONDITION setting screen (1/3) is displayed.
Press the  key.
CONDITION No. selection screen is displayed.
Press the POSITION (
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (1/3)
Press the [COND/TEST] key.
It will return to default screen.
) key and select the setting
Name of the media assigned in "Cutting
Plotter controller" is displayed as the
CONDITION No. name.
CONDITION No. can also be changed from
READY status. See "Change the Cutting
It will return to CONDITION screen without
changing the settings when you press the
POSITION ( ) key (CANCEL) .