Axes Adjustment (4Point Detection) - GRAPHTEC CE6000 SERIES User Manual

Graphtec ce6000 series cutting plotter
Hide thumbs Also See for CE6000 SERIES:
Table of Contents

Advertisement

2 axes adjustment (3POINT detection)
It will detect the vertical and horizontal tilts from 3 registration marks,
and cut is performed matching the tilt of the print.
Precision of print and cut position will be higher than the 1 axis
adjustment.
MARK TYPE 1

4 axes adjustment (4POINT detection)

It will detect the left and right vertical tilts and upper and lower
horizontal tilt from 4 registration marks, and cut is performed
matching the tilt of the print.
Precision of print and cut position will be higher than the 2 axes
adjustment.
MARK TYPE 1
Multiple registration marks (Alignment registration mark)
A function to continuously cut the print with same design aligned,
using a plugin for the Illustrator. It is appropriate for cutting multiple
numbers of stickers or similar.
Cutting area
MARK TYPE 2
Cutting area
MARK TYPE 2
Supplement
Distance between the registration marks can
be adjusted.
Multiple registration marks (Alignment
registration mark) is available. (See the
"Multiple registration marks [Alignment
registration mark]
The printable range on the chart to the left
is for when the registration mark detection
movement distance is not specified. The
cutting area changes depending on the
registration mark detection movement
distance that is set.
Supplement
Distance between the registration marks can
be adjusted.
Multiple registration marks (Alignment
registration mark) is available. (See the
"Multiple registration marks [Alignment
registration mark]
The printable range on the chart to the left
is for when the registration mark detection
movement distance is not specified. The
cutting area changes depending on the
registration mark detection movement
distance that is set.
Supplement
Setting is only possible from the Graphtec
Studio.
It cannot be set on the plotter.
The data for multiple registration marks
(Alignment registration mark) is not possible.
5-9
".)
P.5-9
".)
P.5-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents