GRAPHTEC CE6000 SERIES User Manual page 130

2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the POSITION ( ) key.
ARMS SETTING screen (2/4) is displayed.
4
Press the [3] key (MARK SIZE).
MARK SIZE setting screen is displayed.
5
Press the POSITION (
setting value.
6
Confirm the settings and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS setting screen (2/4).
7
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
5-13
Supplement
Push the [FAST] key to change the setting
digits.
They can be set from 4.0 mm to 20.0 mm.
Supplement
It will return to ARMS SETTING screen (2/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).