Replacing Cutter Blade
Replace the cutter blade by referring to the structure diagram of the cutter pen.
Cutter Plunger Structure
Turn the blade-length adjustment knob in the direction of the
B arrow and pull the blade into the plunger.
One scale unit
approximately 0.1 mm
Turn the plunger cap in the counter-clockwise direction to
remove it from the plunger.
Remove the blade from inside the plunger cap.
Remove a new blade from its pack. Insert the new blade into
the hole provided in the plunger cap.
With the blade inserted into the plunger cap, screw on the
plunger from above.
Fix the plunger cap by turning it clockwise.
Blade-length adjustment knob
See "Structure of Cutter Plunger"
the structure of the cutter plunger.