When User Or Standard Modes Are Selected; When Custom Mode Is Selected - GRAPHTEC FC8000 SERIES User Manual

2
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
3
Press the POSITION (▼) key.
ARMS SETTING screen (2/4) is displayed.
4
Press the [2] key (DISTANCE ADJUST).
DISTANCE ADJUST setting screen is displayed.
5
Press the [1] key (MODE).
DISTANCE ADJUST MODE selection screen is displayed.
6
Press the [1] key (USER), the [2] key (CUSTOM), or the [3] key
(STANDARD).
Mode is selected and it will return to DISTANCE ADJUST screen.
7
The procedures are different depending on the selected mode.

When USER or STANDARD modes are selected

Jump to step 9.

When CUSTOM mode is selected

Press the [2] key (CUSTOM UNIT).
CUSTOM UNIT selection screen is displayed.
Next page
POSITION
Supplement
It will return to ARMS setting screen (2/4) without
changing the settings when you press the
POSITION (◄) key (CANCEL).
Supplement
It will return to MARK DISTANCE screen without
changing the settings when you press the
POSITION (◄) key (PREVIOUS).
5-15