Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Perform Automatic Pre Feed When Cut Data Is Received

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Perform Automatic Pre Feed When Media
8.3
is Set (Initial Feed)
It can be set to automatically feed and return the length of the page when the media is loaded and the media set
lever is raised.
This is equal to automatically perform the "Pre Feed" to prevent the shifting of the media.
P.2-31
"Pre Feed of Media (Paper or Marking Film)"

"Perform Automatic Pre Feed When Cut Data is Received"

P.8-4
"Setting Feed Speed for Media Set"
P.8-7
Supplement
This setting will be saved even if the power is shut off.
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [4] key (MEDIA).
MEDIA SETTING screen (1/2) is displayed.
3
Press the [4] key (INITIAL FEED).
INITIAL FEED screen is displayed.
4
Set the mode by pressing the [1] key (ON) or the [2] key (OFF).
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to MEDIA SETTING screen (1/2).
6
Press the [PAUSE/MENU] key.
It will return to default screen.
Supplement
Perform the settings in Normal mode.
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the POSITION ( ) key.
8-6

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file