When User Or Standard Modes Are Selected; When Custom Mode Is Selected - GRAPHTEC FC8000 Series User Manual

Press the [2] key (ARMS).
2
ARMS SETTINGscreen (1/4) is displayed.
Press the POSITION (¡å ) key.
3
ARMS SETTINGscreen (2/4) is displayed.
Press the [2] key (DISTANCE ADJUST).
4
DISTANCE ADJUST setting screen is displayed.
Press the [1] key (MODE).
5
DISTANCE ADJUST MODE selection screen is displayed.
Press the [1] key (USER), the [2] key (CUSTOM), or the [3] key
6
(STANDARD).
Mode is selected and it will return to DISTANCE ADJUST screen.
The procedures are different depending on the selected mode.
7

When USER or STANDARD modes are selected

Jump to step 9.

When CUSTOM mode is selected

Press the [2] key (CUSTOM UNIT).
CUSTOM UNIT selection screen is displayed.
Next page
POSITION
Supplement
It will return to ARMS setting screen (2/4) without
changing the settings when you press the
POSITION (? ) key (CANCEL).
Supplement
It will return to MARK DISTANCE screen without
changing the settings when you press the
POSITION (? ) key (PREVIOUS).
5-15