Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 185

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

5
Press the [1] key (ON) or the [2] key (OFF).
AUTO PRE FEED is selected and return to AUTO PRE FEED screen.
6
Press the [2] key (FEED LENGTH).
FEED LENGTH setting screen is displayed.
7
Press the POSITION (
setting value.
8
Confirm the setting value, and press the POSITION ( ) key
(CANCEL).
FEED LENGTH is selected and return to AUTO PRE FEED screen.
9
Confirm the setting and press the [ENTER] key.
Setting will be set, and it will return to MEDIA SETTING screen (1/2).
10
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
8-5
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
Supplement
Feed length can be set in 0.1 m units.
Setting range is 0.5 m to 50.0 m.
Press the FAST key to change the setting
digits.
Supplement
It will return to MEDIA SETTING screen (1/2)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
Supplement
[Pr] mark is displayed at the right of the screen
when AUTO PRE FEED is set. See "How to
Use Control Panel"
P.2-24
.

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file