Loading Media (Paper Or Marking Film); Loading Roll Media (Ce6000-40) - GRAPHTEC CE6000 SERIES User Manual

Graphtec ce6000 series cutting plotter
Hide thumbs Also See for CE6000 SERIES:
Table of Contents

Advertisement

2.3

Loading Media (Paper or Marking Film)

Both roll media and sheet media can be used with the CE6000. Load the media according to the instructions
given for each type.
Use the grit roller on the right side of the media (looking from the front) as a guide when setting it in the media
sensor. Afterwards, adjust the push roller so that it's lined up with the side of the media.
P.2-6

Loading Roll Media (CE6000-40)

Loading Roll Media (CE6000-60/120)
P.2-9
Loading Sheet Media (CE6000-40/60)
P.2-14
Loading Sheet Media (CE6000-120)
P.2-16
Loading Roll Media (CE6000-40)
Operation
1
Lower the media set lever to raise the push rollers.
2
Put the roll media on the roll media tray and then push the tip
of the roll media forward from the back of the machine. Make
sure to pull it so that there is no slackening across the roll
media's route.
Push roller
Media set lever
Media sensor
2-6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents