GRAPHTEC CE6000 SERIES User Manual page 136

5
Press the [1] key (X).
X AXIS setting screen is displayed.
6
Press the POSITION (
setting value.
7
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
Offset value will be selected, and it will return to AXIS ORIGIN OFFSET
mode screen.
8
Press the [2] key (Y).
Y AXIS setting screen is displayed.
9
Press the POSITION (
setting value.
10
Confirm the setting and press the POSITION ( ) key
(PREVIOUS).
Offset value will be selected, and it will return to AXIS ORIGIN OFFSET
mode screen.
11
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ARMS SETTING screen (2/4).
12
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
) key and increase or decrease the
5-19
Supplement
Digits of settings can be changed by pressing
the [FAST] key.
Setting range is from -1000.0 to +1,000.0mm.
Supplement
Digits of settings can be changed by pressing
the [FAST] key.
Setting range is from -1000.0 to +1,000.0mm.
Supplement
It will return to ARMS SETTING screen (2/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).