2.12.3 GP-GL Step Size (Simple mode)
Here you can change the distance of 1 Step. Match it to the software you are using.
"Command setting" is only for GP-GL commands.
In default screen, press [PAUSE/MENU] key.
MENU screen is displayed.
Press  key (I/F) .
INTERFACE screen is displayed.
Press  key (GP-GL STEP SIZE).
STEP SIZE setting screen is displayed.
Press  key (0.100 mm),  key (0.050 mm),  key (0.025
mm), or  key (0.010 mm).
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE screen.
Press [PAUSE/MENU] key.
It will return to default screen.
Press the POSITION ( ) key to return to the
interface menu without changing any settings.