Chapter 7:
Setting Regarding Cutting Quality
There are times that ideal cutting may not be possible, such as the lines may shift, corners deform, or uncut
sections occur, due to the characteristics of the media (thickness, how hard it is, etc.) or the shape of the blades,
when the actual cutting is done. Adjust the moving speed and force of the tool, and the control method to prevent
these problems.
This chapter describes the setting regarding the quality of the cutting.
PRODUCT SUMMARY
7.1
To cut the corner of thick media sharply
7.2
Setting the Step Pass
7.3
Setting the Offset Angle
7.4
Setting the Distance Adjust
7.5
Setting Initial Blade Control Position Adjust
7.6
Settings for OFFSET FORCE
7.7
Setting Paper-Weight
7-1