GRAPHTEC CE6000 SERIES User Manual page 40

3
Push the tip of the roll media forward from the back of the
CE6000. Make sure to pull it so that there is no slackening
across the roll media's route.
4
Press the media lock to engage it, and then pull the leading
edge out of the front of the plotter, making sure that it
completely covers the media sensor.
Media sensors
Media lock
2-10
Supplement
When actually cutting, please release the
lock from the media lock (while pulling to the
exterior, slide it forward). (See
Slide the
media lock
.)
P.2-12