Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 50

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

When Feeding Long-axis Media (at least 2 meters)
Position the push rollers at least 5 mm inside the edges of the media.
5 mm
For minimum width media
Make sure that all push rollers are on the long right grit roller.Use the left side of the grit roller as a starting point
and then set the push rollers so that they're on both sides of the media.
The CE6000-40/60 can take media of 55 mm or more, and the CE6000-120 can take media of 90 mm* or more.
* Set the middle push rollers (except the right and the left side of push rollers) hold-down force to "OFF" (weak)
when the all push rollers are on the right side grit roller (wide) with the CE6000-120.
CE6000-40/60
Media sensor
CAUTION
The media must be at least 125 mm in length in media feed direction.
The media must always be positioned over the media sensor.
Push roller
5 mm
Media
Grit roller
Push roller
Media
CE6000-120
Grit roller
Media sensor
2-20
Push roller
Media

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file