Pre Feed of Media (Paper or Marking Film)
The PRE FEED function is used to prevent the loaded media from slipping by automatically advancing the media
the specified length and imprinting it with grit roller marks. This function can also be used to acclimate long media
lengths to the operating environment in order to minimize media expansion and contraction, and to ensure stable
media feed operations.
* When feeding long-axis media (at exceeds 2 meters) on the CE6000-60/120, be sure to use the basket (option).
Perform Automatic Pre Feed When Cut Data is Received
Perform Automatic Pre Feed When Media is Set (Initial Feed)
Setting Feed Speed for the Pre Feed
Press the [PAUSE/MENU] key in READY status.
MENU screen is displayed.
Press the  key (MEDIA)
MEDIA SETING screen (1/2) is displayed.
Press the  key (PRE FEED) .
FEED LENGTH setting screen is displayed.
Press the POSITION (
Confirm the setting and press the [ENTER] key.
Pre feed will start, and it will return to MEDIA SETTING screen (1/2) .
Press the [PAUSE/MENU] key.
It will return to default screen.
) key and increase or decrease the
Perform the settings in Normal mode.
Press the POSITION ( ) key (RETURN)
to return to the MEDIA setting screen (1/2)
without changing any settings.
Press the [FAST] key to select the setting
You can select any digit between 0.5m and
When you select "SHEET" for paper feeding,
leveling will not take place.