Load the media with registration marks (2POINTS) plotted.
Set the MARK SCAN MODE to ARMS, and POINTS to
Setting MARK SCAN Mode and Numbers
Set the shape and size of the registration mark, mark
distance, distance adjust mode, offset, paper-weight, sensor
level, scan position adjustment, etc., as needed.
Setting Shape (Pattern) of Registration Mark
Setting Registration Mark Size
Setting Mark Distance
Setting Distance Adjustment Between the
Setting Offset Between the Registration Mark and
Cutting Origin Points
Adjusting the Sensor Level
Manually Adjusting the Sensor Level (Threshold
Press the [PAUSE/MENU] key.
MENU screen is displayed.
Press the  key (ARMS).
ARMS SETTING screen (1/4) is displayed.
Steps are different from here depending if it is going to move
to registration mark automatically to scan the registration
mark, or if it is going to move manually to scan. See next
See "Loading Media (Paper or Marking Film)"
It is not necessary to set the MARK DISTANCE
when it is adjusted manually.
for loading the media.