Adjust the Blade Length (Automatic Height Adjust)
Test cutting must be performed several times in order to confirm the optimal blade length setting. However, if the
blade length adjustment function is used, the optimal length can be easily set.
Load the media for test cutting in the plotter.
Press the POSITION (
location you wish to perform the blade length adjustment.
Press the [COND/TEST] key in the default screen.
CONDITION setting screen (1/3) is displayed.
Press the POSITION ( ) key.
CONDITION setting screen (3/3) is displayed.
Press the  key (BLADE ADJUST).
Message prompting to turn the blade-length adjustment knob is
As instructed, turn the blade length adjustment knob to the
left to fully retract the blade.
) key the tool carriage to the
Perform the settings in Normal mode.
See "Structure of Cutter Plunger"
bladelength adjustment knob.