Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Test The Registration Mark Sensor

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Test the Registration Mark Sensor

If there still is a difference in the cutting, even after performing an
adjustment using the registration mark, it is possible to check if there
is a problem with the registration mark itself or the application by
evaluating the position of the registration mark plotted and detected
only using the plotter.
Operation
1
Print the standard registration mark in the accessory DVD.
MARK TYPE 1
2
Load the printed media onto the plotter.
3
Press the [PAUSE/MENU] key.
MENU screen is displayed.
4
Press the [2] key (ARMS).
ARMS SETTING screen (1/4) is displayed.
5
Press the POSITION ( ) key.
ARMS SETTING screen (4/4) is displayed.
MARK TYPE 2
5-24
CAUTION
This function performs cutting after the
registration mark is scanned. If a cutter is used
as the tool, it may harm the plotter.
Supplement
Print the "Test Pattern 1" to test MARK TYPE
1, and "Test Pattern 2" to test MARK TYPE 2.
Standard registration mark is inside the
"ARMS Test Files" folder of the accessory
DVD.
Registration
File
Mark
Format
MARK TYPE 1
pdf
ARMStest_type1.pdf
eps
ARMStest_type1.eps
MARK TYPE 2
pdf
ARMStest_type2.pdf
eps
ARMStest_type2.eps
Supplement
See "Loading Media (Paper or Marking Film)"
for loading the media.
P.2-5
File Name

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file