Test Modes; Printing A List Of The Currently Selected Conditions - GRAPHTEC FC 4500 Series Service Manual

8

TEST MODES

8.1

Printing a List of the Currently Selected Conditions

Caution:
As soon as the F2 (COND. PAT.) key is pressed to select this function in Step (5) below, the pen carriage
begins moving. Be sure to keep hands, hair, and so forth away from the plotter's moving parts.
The PRINT CONDITION function prints a list of the plotter's currently selected conditions so you can
check them all at once.
Setting Procedure
(1) Load a medium of A4 size or larger in the plotter.
(2) Press the
(3) Press the
F4
(4) Press the
F4
(5) When the
F2
a list of its currently selected conditions.
(6) After the conditions have been printed, the plotter resumes READY status.
FC4500-UM-251-9370
PAUSE key, then press the
FORCE
F1
OPTION1
F2
SPEED
(OPTION2) key to display the menu below.
FORCE
F1
UP HEIGHT
MOVE SPD
F2
SPEED
(TEST) key to display the menu below.
FORCE
F1
COND. PAT.
F2
SPEED
(COND. PAT.) key is pressed, the menu below appears and the plotter begins printing
FORCE
F1
PRINT CONDITION
F2
SPEED
NEXT PAGE key until the menu below appears.
OFFSET
OPTION2
QUALITY
OFFSET
POS.OPT
TEST
QUALITY
OFFSET
SELF TEST
DUMP
QUALITY
OFFSET
QUALITY
139
8 TEST MODES
F3
F4
F3
F4
F3
F4
F3
F4