Printing the Setting of the Plotter
Condition setting list can be printed when you need to check the current setting of the plotter.
Do not place you hand around the moving areas. The tool carriage will start moving, so there is a chance of injury. Tool carriage
will start to move immediately after selecting to print the CONDITION list.
Once you start printing, pause/cancel can not be performed in the middle.
Set a media larger than A3 size.
Set the pen tool to the tool holder 1 (Backward) and select
the condition where the pen tool is set.
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
Press the POSITION ( ) key (TEST).
TEST menu screen (1/2) is displayed.
Press the  key (CONDITION LIST).
CONDITION LIST print screen is displa yed.
See "Loading Media (Paper or Marking Film)"
See "Attaching a Tool"
the pen tool.
For changing the tool conditions please refer
to "Selecting Tool Condition"
for tool settings please refer to "Setting the
Perform the settings in Normal mode.
for loading the media.