GRAPHTEC CE6000 SERIES User Manual page 237

5
Press the [3] key (DATA DUMP).
DATA DUMP start screen is displayed.
6
Confirm that the pen tool is set.
7
Confirm that operation area of tool and media is safe.
8
Press the [1] key (DONE).
Output of the dump list starts.
9
Turn the power off to stop the printing.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
It will return to TEST menu screen without
printing by pressing the [2] key (CANCEL DATA
DUMP).
Supplement
It will keep on printing until the power is turned
off once the printing is started by pressing the
[1] key (DONE).
13-19
CAUTION