Setting the Force
Set the cutting force that is used in each of the condition numbers.
Setting range : CE6000-40 : 1 to 31
: CE6000-60 : 1 to 31
: CE6000-120 : 1 to 38
Operation
1
Press the [COND/TEST] key in the default screen.
CONDITION setting screen (1/3) is displayed.
2
Press the [4] key (FORCE).
FORCE setting screen is displayed.
* Display may vary depending on the selected condition number.
3
Press the POSITION (
number (CONDITION No.).
4
Press the POSITION (
setting value.
5
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to CONDITION screen (1/3).
6
Press the [COND/TEST] key.
It will return to default screen.
) key and select the condition
) key and increase or decrease the
2-41
Supplement
Perform the settings in Normal mode.
Supplement
It will return to CONDITION screen (1/3)
without changing the settings when you press
the [4] key (CANCEL) .
Supplement
Guideline to set force
See "Setting the Tool Condition"
.
P.2-32