GRAPHTEC CE6000 SERIES User Manual page 205

Enabling/Disabling the Beep Setting (BEEP FOR KEY OPERATION)
This function selects whether to enable or disable the beep that is emitted whenever a control panel key is
pressed.
Operation
1
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
2
Press the POSITION ( ) key (ADV.).
ADVANCE setting screen (1/2) is displayed.
3
Press the POSITION ( ) key.
ADVANCE setting screen (2/2) is displayed.
4
Press the [3] key (BEEP FOR KEY OPE.).
BEEP FOR KEY OPE. setting screen is displayed.
5
Press the [1] key (ON) or the [2] key (OFF).
6
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to ADVANCE setting screen (2/2).
7
Press the [PAUSE/MENU] key.
It will return to the default screen.
Supplement
Perform the settings in Normal mode.
10-7