3.4
Setting the Cutting Direction
Rotate the coordinate axes to change the cutting direction.
Reference
The rotation settings will be saved even if the power is shut off.
Coordinate axes rotation
settings on
Coordinate axes rotation
settings off
Operation
1
Press the [PAUSE/MENU] key.
MENU screen is displayed.
2
Press the [3] key (AREA).
AREA PARAMETERS setting screen (1/2) is displayed.
3
Press the [3] key (ROTATE).
ROTATE screen is displayed.
4
Press the [1] key (ON) or the [2] key (OFF).
Supplement
Perform the settings in Normal mode.
3-10