Download Print this page

GRAPHTEC CE6000 SERIES User Manual: How To Use Control Panel; Control Keys; Menu Keys

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

2.7

How to Use Control Panel

This section explains the function of lamps and keys on the control panel.
Screen (LCD)

Control Keys

POSITION (
) key
............................ There are following functions depending on the operation.
FAST .......................... The tool carriage or the media will move faster when it is pressed simultaneously with
ORIGIN ...................... It will set the current position as an origin point.
COPY ......................... Copy of data in the buffer memory is output.

Menu Keys

SIMPLE ...................... You can switch between Simple mode and Normal mode on the default screen.
PAUSE/MENU ........... It will switch to the MENU mode. MENU lamp is lit in the MENU mode.
COND/TEST .............. It will display the screen to set the tool conditions.
1, 2, 3, 4 ...................... Select the menu number displayed in the screen.
ENTER ....................... It will define the settings.
[2] key
[1] key
[SIMPLE] lamp
[3] key
[4] key
Move the tool carriage and media. It will move specified distance (see "Setting of Step
Movement Distance"
it is pressed down. It will select the menu when
screen.
POSITION key.
It will work as a menu key when it is displaying "FAST" on the screen. Press the [FAST]
key during READY status to display the current area and tool carriage position.
On the default screen, pressing the [ENTER] and [ORIGIN] keys at the same time will
allow you to reset the machine. (Only in Normal mode)
Switching modes will reset the machine.
It will go into MENU mode if it is pressed once, and MENU mode will be turned off when
it is pressed again.
Different function are set in the MENU mode.
Data received while in the MENU mode will be stored in the data buffer.
Use this when checking tool conditions to activate a cutting test.
Press the [ENTER] and [ORIGIN] keys simultaneously on the default screen to reset the
machine. (Only in Normal mode)
[SIMPLE] key
[MENU] lamp
[FAST] key
POSITION (
) when it is pressed once, and continuously move when
P.3-4
2-24
[PAUSE/MENU] key
[ORIGIN] key
[COPY] key
[ENTER] key
) key
[COND/TEST] key
are displayed in the menu on the

Advertisement

Troubleshooting

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file