Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Setting Of Mark Scan Mode And Number Of Adjustment Marks

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

6.1
Outline of Manual Position Adjust
With manual position adjust, tilt of the axes are adjusted using the 2POINTS, 3POINTS, or 4POINTS adjustment
marks (grits or registration marks) as a standard. The distance between each points can also be entered to adjust
the distance.
Move the tip of each tool to the appropriate point.
Use magnifier or light pointer as a tool to match each points.
Use the media with prints (adjustment marks such as grits or registration marks) necessary to get XY axes and
origin point.

Setting of Mark Scan Mode and Number of Adjustment Marks

To perform the AXIS ALIGNMENT, set the MARK SCAN MODE to "AXIS ALIGNMENT".
Select the number of the registration marks (adjustment marks) from 2POINTS, 3POINTS, or 4POINTS when the
MARK SCAN MODE is set to "AXIS ALIGNMENT". Position of each adjustment marks are as following.
2POINTS
4POINTS
Fourth point
Third point
Second point
First point or origin point
Second point
First point or origin point
6-2
3POINTS
Second point
First point or origin point
Third point

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file