Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Advanced Registration Mark Sensing System

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Chapter 5: ARMS

(Advanced Registration Mark Sensing System)

ARMS (Advanced Registration Mark Sensing System) is a function to scan the registration mark written on the
media using sensors.
Tilt of the axes and distance can be adjusted with 2POINTS or 3 POINTS. 2 axes warp adjustment can be
adjusted in addition to axes adjustment (tilt) and distance adjustment with 4POINTS.
When cutting the outlines of the printed figure, and when re-cutting media, using ARMS to adjust for printing
position discrepancies, high precision cutting can be done.
It is possible to perform a multiple registration mark adjustment or segment area adjustment by linking with the
application software on the computer. See the operation guides of the application software about the registration
mark adjustment function linked with the application software.
This chapter describes the outline of the ARMS (Advanced Registration Mark Sensing System) and how to setup
and use the ARMS on the control panel.
PRODUCT SUMMARY
5.1
Outline of ARMS
5.2
Setting and Adjustment of ARMS
5.3
Setting the Position Using ARMS
5-1

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file