Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 79

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

7
Set the cutter Plunger in Tool Holder 1 (Backward).
8
Press the [ENTER] key.
You can calculate the height by moving the tool up and down.
TO ACHIEVE THE TARFET LENGTH screen is displayed.
9
Press the [1] key (BLADE LENGTH TARGET).
BLADE LENGTH TARGET screen (TARGET) is displayed.
10
Press the POSITION (
setting value.
11
Confirm the settings and press the ENTER key (SET).
The Blade Length Target will be selected, and you will return to the TO
ACHIEVE THE TARGET LENGTH screen.
12
Press the [2] key (CHECK).
You can calculate the height by moving the tool up and down.
The amount and direction to turn the adjustment knob is displayed.
) key and increase or decrease the
2-49
Supplement
Adjustment is only possible for the cutter
pen set in Tool Holder 1 (Backward). It does
not apply to Tool Holder 2 (Forward) . See
"Attaching a Tool"
P.2-2
setting.
Supplement
"T" is the target value of the blade length, and
"H" is the current blade height (amount) .
Turning the blade-length adjustment knob
displays the number of turns and direction.
for instructions on

Advertisement

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file