Download Print this page

GRAPHTEC CE6000 SERIES User Manual: Front View: Ce6000-120

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Front View: CE6000-120

Grit roller position guide
Cutting mat
Cutting groove
Grit roller
Control panel ...........................Used to access various plotter functions.
Push rollers .............................Rollers that push the media against the grit rollers.
Grit rollers ................................Metallic rollers with a file-like surface that feed the media back and forth.
Media sensors .........................The front sensor is used to sense the leading edge of the media. The rear
Tool carriage ............................Moves the cutter-pen or plotting pen across the media during cutting or
Tool holder ...............................Holds the cutter-pen or plotting pen and moves it up or down.
Grit roller position guide ........Stickers on the front of the Y rail and the rear side of the top cover that show
Cutting mat ..............................Cutter blade moved on this mat, preventing wears of the blade.
Cutting groove .........................Use this groove when using the media cutter.
Media set lever ........................Used to raise or lower the Push rollers during the loading or unloading of
USB interface connector ........Used to connect the plotter to the computer with a USB interface cable.
RS-232C interface connector ..Used to connect the plotter to the computer with a RS-232C interface cable.
Media stopper ..........................This stops the stock shaft from spinning when setting in media.
Media guide bar .......................Used to keep media straight when setting it in.
Push roller
Media guide bar
sensor is used to sense the trailing edge of the media.
plotting.
the position of each grit roller. Use these alignment marks as an aid in locating
the Push rollers.
media.
It is also utilized when pulling roll media straight out.
1-7
Tool holder
Tool carriage
Control panel
Media sensor
Media set lever
Media stopper
USB interface connector
RS-232C interface connector

Advertisement

Troubleshooting

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file