GRAPHTEC CE6000 SERIES User Manual page 228

Symptom LCD Display
E04013
E04014
E04015
E04016
E04017
E04018
E04019
E04020
E04021
E04022
E04023
E04024
E04025
Possible Cause
It has exceeded detection area while
detecting the registration mark.
It has exceeded detection area while
detecting the registration mark.
It has exceeded detection area while
detecting the registration mark.
It has exceeded detection area while
detecting the registration mark.
It has exceeded detection area while
detecting the registration mark.
Media set lever was lowered.
There was cancel operation by the user.
There is a defect in the detection settings
value.
Registration mark was not detected in the
auto detection area.
There was cancel operation by the user.
Registration mark was not detected.
Registration mark was not detected.
Registration mark was not detected.
13-10
Solution
Check the media. Check the print position
of the registration mark.
Check the media. Check the print position
of the registration mark.
Check the media. Check the print position
of the registration mark.
Check the media. Check the print position
of the registration mark.
Check the media. Check the print position
of the registration mark.
Reload the media and try again.
Redo the process.
Check the settings value.
Check the media. Check the print position
of the registration mark.
Redo the process.
Redo the sensor level adjustment.
Change the color of the registration mark.
Check the media.
Check the print position of the registration
mark.
Redo the sensor level adjustment.
Change the color of the registration mark.
Check the media.
Check the print position of the registration
mark.
Redo the sensor level adjustment.
Change the color of the registration mark.
Check the media.
Check the print position of the registration
mark.