Creating Test Pattern - GRAPHTEC CE6000 SERIES User Manual

Graphtec ce6000 series cutting plotter
Hide thumbs Also See for CE6000 SERIES:
Table of Contents

Advertisement

13.3

Creating Test Pattern

Create a self-test pattern to check the operation of the plotter.
CAUTION
Do not place your hand around the moving areas. The tool carriage will start moving, so there is a chance of injury. Tool carriage will
start to move immediately after selecting to plot the test pattern.
Operation
1
Set a media larger than A3 size.
2
Set the pen tool to the tool holder 1 (Backward) and select
the condition where the pen tool is set.
3
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
4
Press the POSITION ( ) key (TEST).
TEST menu screen (1/2) is displayed.
5
Press the [2] key (SELF TEST).
SELF TEST start screen is displayed.
6
Confirm that the pen tool is set.
Supplement
See "Loading Media (Paper or Marking Film)"
P.2-6
Supplement
See "Attaching a Tool"
the pen tool.
For changing the tool conditions please refer
to "Selecting Tool Condition"
for tool settings please refer to "Setting the
Tool"
Supplement
Perform the settings in Normal mode.
13-16
for loading the media.
for setting
P.2-4
P.2-32
.
P.2-38
, and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents