Download Print this page

GRAPHTEC CE6000 SERIES User Manual Page 24

Graphtec ce6000 series cutting plotter.
Hide thumbs

Advertisement

Assembly (CE6000-60)
CAUTION
Please assemble with two or more people.
People can be accidentally injured by the machine's edges. Please be very careful.
Please be careful not to get your hands pinched or stuck when you secure the machine.
1
Assemble the left and right stand sides. Fasten a stand foot
to each of the stand side bars with two socket head cap
screws using the Allen wrench.
Cutout
2
Attach the center bar to each of the left and right stand sides
temporarily with two socket head cap screws, using the Allen
wrench. Mount the center bar so that each one of stand feet
of short side to be front side.
Socket head
cap screw
Stand side bar
Stand sides
Center bar
Cutout
Socket head
cap screw
Stand foot
Stand side bar
Socket head
cap screw
1-10
Supplement
Set the stand side bar in properly so that it
matches the cutout in the stand foot.
Assemble the stand so that the front and rear
lengths of the stand foot are the same for
both the left and right stand sides.

Advertisement

Troubleshooting

   Also See for GRAPHTEC CE6000 SERIES

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jishad Jan 10, 2018 08:16:
    my graphtec ce 6000-60 showing an error message
    Hardware illegal code. Can you solve this
  • sina oyekunle Dec 21, 2017 02:44:
    my graphtec ce 6000-60 showing an error message: check cam_b-pcb
  • jitendra solanki Jun 14, 2017 05:31:
    i want ce6000 series user manual pdf file