When you want to change the force, press the  key
The screen below will appear.
Press the POSITION (
The force setting can be modified with the ± adjusted value.
When confirming the setting, press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.
) keys to change the current value.
Press the [ENTER] key (SET) to confirm the
settings and return to the READY screen.
Press the  key (RETURN) to return to
the READY screen without changing any
The +0 value allows you to use the standard
force setting. If adjustment is necessary, you
can enter the ± adjusted value.