Circle-Command Resolution Setting (CIRCLE RESOLUTION)
This function set the sets the resolution upon receipt of the circle-command for the HP-GL pen plotter arc cutting
Select either "AUTO" or "DEFAULT", which is 5 degrees.
Press the [PAUSE/MENU] key in the default screen.
MENU screen is displayed.
Press the POSITION ( ) key (I/F).
INTERFACE setting screen (1/2) is displayed.
Press the POSITION ( ) key.
INTERFACE setting screen (2/2) is displayed.
Press the  key (CIRCLE RESOLUTION).
CIRCLE RESOLUTION setting screen is displayed.
Press the  key (DEFAULT) or the  key (AUTO).
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to INTERFACE setting screen (2/2).
Press the [PAUSE/MENU] key.
It will return to the default screen.
Perform the settings in Normal mode.