Adjusting the Sensor Level
Scan level (threshold value between the media background color and registration mark) of the sensor scanning
the registration mark is automatically adjusted.
Sensor is adjusted to scan the registration mark written in black lines on white background. Readjust the scan
level of the sensor depending on the color and gloss of the media.
If it is hard to adjust the level automatically due to media surface characteristics, adjust the scan level of the
Level adjustment patterns can be printed on media that uses
the patterns included on the attached DVD, or set to media
with level adjustment patterns.
Level adjustment pattern
Press the [PAUSE/MENU] key.
MENU screen is displayed.
Press the  key (ARMS).
ARMS SETTING screen (1/4) is displayed.
Press the POSITION ( ) key twice.
ARMS SETTING screen (3/4) is displayed.
Press the  key (SENSOR ADJUST).
SENSOR ADJUST screen is displayed.
See "Loading Media (Paper or Marking Film)"
Standard registration mark patterns are in
the [ARMSTest Files] folder on the attached
MARK TYPE 1
MARK TYPE 2
For level adjustment pattern, please use the
registration mark color and registration mark
line width for the media in use.
It will return to ARMS SETTING screen (3/4)
without changing the settings when you press
the POSITION ( ) key (CANCEL).
for setting the media.