Selecting Tool Condition
In Simple mode, you can change tool conditions for five different types of media.
Normal mode can remember up to 8 settings.
Changing these settings allows you to make the proper settings for each different type of media.
The [SIMPLE] key allows you to switch between Simple mode and Normal mode. Switching will reset the
Press the [COND/TEST] key in the default screen.
CONDITION setting screen (1/5) is displayed.
Press the POSITION (
Select previously registered media types (tool conditions).
Confirm the setting and press the [ENTER] key (SET).
Setting will be set, and it will return to default screen.
) key and select the setting.
Use Normal mode for changing the type of
blade, offset, and acceleration.
Pushing the  key (RETURN) allows you
to return to the conditions screen without
changing the settings.