GRAPHTEC CE6000 SERIES User Manual page 235

7
Confirm that operation area of tool and media is safe.
8
Press the [1] key (DONE).
Plotting of the test pattern starts.
9
Turn the power off to stop the printing.
Do not place your hand around the moving
areas. The tool carriage will start moving, so
there is a chance of injury.
Supplement
It will return to TEST menu screen without
printing by pressing the [2] key (CANCEL SELF
TEST).
Supplement
It will keep on printing until the power is turned
off once the printing is started by pressing the
[1] key (DONE).
13-17
CAUTION