Troubleshooting; When The Plotter Does Not Operate After Turning The Power On - GRAPHTEC CE6000 SERIES User Manual

13.1

Troubleshooting

When the Plotter Does Not Operate After Turning the Power On

Symptom
• Nothing is displayed on the LCD panel.
• Nothing is displayed on the LCD panel.
• "Sum-Ck ROM RAM ERR!!" is displayed
on the LCD panel.
Possible Cause
There is no power supplied.
Or, the plotter is defective.
The plotter is defective.
The ROM or RAM is defective.
13-2
Solution
Check that the power cord is securely connected
to the plotter's AC line inlet and the electrical
outlet.
Check that the power is supplied to the electrical
outlet.
Contact your Graphtec customer center if the
problem still exists.
Contact your Graphtec customer center if the
problem still exists.
Contact your Graphtec customer center if the
problem still exists.