Table of Contents
Advertisement
Views
System view
Predefined user roles
network-admin
Usage guidelines
If the active IRF fabric has failed to work before the IRF split problem is fixed, use this command to
restore an IRF fabric in Recovery state. The recovered IRF fabric will take over the active IRF fabric
role.
Examples
# Restore the normal MAD state of the IRF fabric in Recovery state.
<Sysname> system-view
[Sysname] mad restore
This command will restore the device from multi-active conflict state. Continue? [Y/N]:Y
Restoring from multi-active conflict state, please wait...
port group interface
Use port group interface to bind a physical interface to an IRF port.
Use undo port group interface to remove the binding of a physical interface to an IRF port.
Syntax
port group interface interface-type interface-number
undo port group interface interface-name
Default
No physical interfaces are bound to an IRF port.
Views
IRF port view
Predefined user roles
network-admin
Parameters
interface-type interface-number : Specifies a physical interface by its type and number.
interface-name : Specifies a physical interface in the interface-typeinterface-number
format. No space is allowed between the interface-type and interface-number
arguments.
Usage guidelines
Execute this command multiple times to bind multiple physical interfaces to an IRF port. You can bind
a maximum of eight physical interfaces to an IRF port. However, you might be unable to bind as
many as eight physical interfaces to an IRF port due to hardware restrictions. For more information
about IRF physical port restrictions, see the installation guide for the device.
Use the shutdown command to shut down a physical interface before you bind it to or remove it
from an IRF port. To bring up the physical interface after a binding or binding removal operation, use
the undo shutdown command.
For more information about IRF port binding requirements, see Virtual Technologies Configuration
Guide.
24
Advertisement
Table of Contents
