Display Bgp Routing-Table As-Path-Acl - H3C S9500 Series Command Manual

Command Manual – BGP
H3C S9500 Series Routing Switches
Field
Next Hop
MED
LocPrf
PrefVal
Path
PrefVal
Ogn

1.1.22 display bgp routing-table as-path-acl

Syntax
display bgp routing-table as-path-acl as-path-acl-number
View
Any view
Default Level
1: Monitor level
Parameters
as-path-acl-number: Displays routing information permitted by the AS path ACL.
Description
Use the display bgp routing as-path-acl command to display BGP routes permitted
by an as-path ACL.
Examples
# Display BGP routes permitted by AS path ACL 1.
<Sysname> display bgp routing-table as-path-acl 1
Next hop IP address
MULTI_EXIT_DISC attribute
Local preference value
Preferred value of the route
AS_PATH attribute, recording the ASs the packet has passed to
avoid routing loops
Preferred value
Origin attribute of the route, one of the following values:
Indicates that the route is interior to the AS.
i
Summary routes and the routes configured using the
network command are considered IGP routes.
Indicates that the route is learned via the exterior gateway
e
protocol (EGP).
Short for INCOMPLETE. It indicates that the origin of the
?
route is unknown and the route is learned by other means.
1-25
Chapter 1 BGP Configuration Commands
Description