Ipv6 Basics Commands; Display Ipv6 Fib - H3C S6550X-HI Series Command Reference Manual

IPv6 basics commands

display ipv6 fib

Use
display ipv6 fib
Syntax
display ipv6 fib [ vpn-instance vpn-instance-name ] [ ipv6-address
[ prefix-length ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. If you do not specify a VPN instance, this command
displays IPv6 FIB entries for the public network.
ipv6-address
IPv6 address, this command displays all IPv6 FIB entries.
prefix-length
not specify the prefix length, this command displays the IPv6 FIB entry longest matching the IPv6
address.
Examples
# Display all IPv6 FIB entries for the public network.
<Sysname> display ipv6 fib
Destination count: 1 FIB entry count: 1
Flag:
U:Usable
R:Relay
Destination: ::1
Nexthop
Time stamp : 0x1
Interface : InLoop0
Table 1 Command output
Field
Destination count
FIB entry count
Destination
Prefix length
to display IPv6 FIB entries.
: Displays IPv6 FIB entries for a destination IPv6 address. If you do not specify an
: Specifies a prefix length for the IPv6 address, in the range of 0 to 128. If you do
G:Gateway H:Host
F:FRR
: ::1
: Specifies an MPLS L3VPN instance by its name, a
B:Blackhole D:Dynamic
Description
Total number of destination addresses.
Total number of IPv6 FIB entries.
Destination address.
Prefix length of the destination address.
1
S:Static
Prefix length: 128
Flags: UH
Label: Null
Token: Invalid