Editing A Dcb Switch - Brocade Communications Systems Brocade 8/12c User Manual

14
Switch policies
9. Click Start on the Deployment Status dialog box to save the changes to the selected LAG or
10. Click Close to close the Deployment Status dialog box.

Editing a DCB switch

1. Select Configure > DCB from the menu bar.
2. Select the DCB switch from the Products/Ports table.
3. Click Edit.
4. Configure the policies for the Edit Switch tabs, which are described in the following sections:
5. When you have finished configuring the policies, apply the settings to the switch.
346
LAGs.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The Edit Switch dialog box displays
FIGURE 121 Edit Switch dialog box
•
"QoS configuration" on page 352
•
"FCoE provisioning" on page 359
•
"VLAN classifier configuration"
•
"LLDP-DCBX configuration"
•
"802.1x authentication"
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog.
(Figure 121).
on page 362
on page 366
on page 371
Brocade Network Advisor SAN User Manual
53-1002167-01