Editing A Cee Switch - Brocade Communications Systems Brocade BladeSystem 4/24 User Manual

Editing a CEE switch

1. Select Configure > Switch > CEE from the menu bar.
2. Select the CEE switch from the Products/Ports table.
3. Click Edit.
FIGURE 110
4. Configure the policies for the Edit Switch tabs, which are described in the following sections:
5. When you have finished configuring the policies, apply the settings to the switch.
6. Click OK.
7.
8. Click Start to apply the changes, or click Close to abort the operation.
DCFM Professional Plus User Manual
53-1001774-01
The CEE Configuration dialog box displays, showing the status of all CEE-related hardware and
functions.
The Edit Switch dialog box displays
Edit Switch dialog box
•
"QoS configuration" on page 373
•
"LLDP-DCBX configuration"
•
"Access Control List configuration"
•
"Spanning Tree Protocol configuration"
•
"802.1x authentication"
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog.
The CEE Confirmation and Status dialog box displays.
Review the changes carefully before you accept them.
(Figure 110).
on page 382
on page 388
on page 393
on page 398
15
365