Removing The Lifter Drive Assembly (Right Deck) - Canon ImageRunner 600 Service Manual

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS
7. Removing the Lifter Drive
Assembly (right deck)
Construction
1) Remove the rear cover.
2) Remove the high-voltage transformer
(DC).
3) Remove the flywheel.
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the screw, and loosen the harness
guide [1]; disconnect the two connectors
[2], and remove the four screws [3]; then,
detach the lifter drive assembly (for the
right deck) [4].
9-54
COPYRIGHT © 1999 CANON INC.
[1]
[4]
[3]
Figure 9-D709
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
[3]
[2]
[2] [3]