Removing The Dimm Of The Image Processor Pcb - Canon ImageRunner 600 Service Manual

Hide thumbs Also See for ImageRunner 600:

Table of Contents

CHAPTER 13 TROUBLESHOOTING

Removing the DIMM of the Image Processor PCB

1) Turn off the main power switch, and disconnect the power cord from the power outlet.

2) Remove the copyboard glass, and detach the small cover of the IP cover by removing the

3) Open the claws of the slot, and pull off the DIMM as if to lift it at an angle.

Figure 13-702

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

Table of Contents