Vii . Disassembly/Assembly - Canon ImageRunner 600 Service Manual

Hide thumbs Also See for ImageRunner 600:

Table of Contents

VII . DISASSEMBLY/ASSEMBLY

The copier possesses the mechanical characteristics discussed in the following pages; go

through the instructions given when disassembling/assembling the copier's parts while keeping the

following in mind:

Disconnect the power plug before disassembly/assembly work.

2. Assemble the parts by reversing the steps used to disassemble them, unless otherwise noted.

3. Identify the screws by type (length, diameter) and location.

4. Do not leave out the toothed washer that comes with one of the mounting screws on the rear

cover to protect against static electricity.

5. Do not leave out the washer that comes with the screw used for the grounding wire and the

varistor to ensure electrical continuity.

6. Do not operate the machine with any of its parts removed, unless otherwise mentioned.

7. Turn off the front cover switch or the power switch before sliding out the duplexing feeding

unit or the fixing assembly.

CHAPTER 9 EXTERNALS/AUXILIARY MECHANISMS

CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.

Table of Contents