Canon ImageRunner 600 Service Manual page 815

<CLEAR>
Clearing RAM/Error Code Histories
Level 3
ERR Clearing Error Codes
Operation
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power.
IP Initializing the RAM on the Image Processor
Operation
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power.
JAM- Clearing the Jam History
HIST Operation
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power.
ERR- Clearing the Error Code History
HIST Operation
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power.
MF-CON Initializing the RAM on the MFC PCB
Operation
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power.
PWD- Use it to clear the password set in user mode for
CLR 'system administrator'.
Operation
1) Select the item to highlight, and press the OK key.
2) Turn off and then on the main power.
COPYRIGHT © 2000 CANON INC.
Description
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
CHAPTER 13 TROUBLESHOOTING
COPIER>FUNCTION
Remarks
• The code is cleared only
when the main power
switch is turned off and
then on. Be sure to turn
it off and then on.
• The RAM is initialized
only when the main
power switch is turned
off and then on. Be sure
to turn it off and then on.
• The history is cleared
only when the main
power switch is turned
off and then on. Be sure
to turn it off and then on.
• The history is cleared
only when the main
power switch is turned
off and then on. Be sure
to turn it off and then on.
• The RAM is initialized
only when the main
power switch is turned
off and then on. Be sure
to turn it off and then on.
• Be sure to turn off and
then on the power; the
password will not be
cleared unless the power
is removed once.
13-227