Canon ImageRunner 600 Service Manual page 226

8) Slide out the process unit [7] as far as pos-
sible; while holding the grips, detach it by
lifting it.
Caution:
When placing the process unit after re-
moval, rotate the kit support plate [1]
counterclockwise so as to keep a dis-
tance from the floor.
Points to Note When Removing
the Photosensitive Drum
[1] When you have removed the photo-
sensitive drum, do not rotate the
magnet roller of the cleaner unit.
Doing so could cause leakage of
toner.
[2] When removing the photosensitive
drum or mounting it, do not rotate it
counterclockwise to avoid bending
of the blade.
COPYRIGHT © 1999 CANON INC.
CHAPTER 6 IMAGE FORMATION SYSTEM
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A.
Grip
Figure 6-D703
[1]
Figure 6-D704
[7]
Grip
6-67