Removing The Original Size Sensor (3/4) - Canon ImageRunner 600 Service Manual

CHAPTER 3 ORIGINAL EXPOSURE SYSTEM
2. Removing the Original Size
Sensor (3/4)
1) Remove the copyboard glass.
2) Move the No.1 mirror mount to the left
edge.
3) Remove the one screw [1], and disconnect
the connector [2]; then, detach the original
sensor unit (rear) [3].
4) Disconnect the connector [4] (one each),
and detach the original sensor (3/4) [5].
3-32
COPYRIGHT © 2000 CANON INC.
[1]
Figure 3-D503
[5]
Figure 3-D504
CANON imageRUNNER 600 REV.1 JAN. 2000 PRINTED IN U.S.A
[3]
[2]
[4]